Product Description

Product Introduction  

The 13-frequency navigation decoy module produced by Shiningintl is suitable for anti-UAV scenarios in the fields of petroleum, petrochemical, electric power, police and military industry. The module is compact, light, easy to use and reliable in function and performance, which is convenient for users to integrate quickly. Based on the navigation satellite signal simulation technology, the module broadcasts the simulated satellite signal consistent with the navigation satellite signal by simulating the in-orbit navigation satellite signal. After the UAV receives the analog satellite signal sent by the equipment, it uses the analog satellite signal to locate and output the corresponding position. Various decoy modes for the unmanned aerial vehicle can be realized, including course guidance, expulsion, forced landing, rapid crash, and the like;

Product Features

1. Support the signal receiving and simulation transmitting functions of the common frequency points of the four major global navigation satellite systems;
2. It can carry out navigation decoy for UAV relying on satellite navigation and positioning system, and realize UAV forced landing, course guidance, prohibition of take-off, navigation satellite signal interference and other objectives.
3. It supports the function of course guidance and controls the movement of the target UAV in the horizontal forward, backward, left and right directions.
4. Support external command to control arbitrary navigation signal combination transmission;
5. Support external commands to set any position coordinates (longitude, latitude, altitude), or built-in fixed coordinates;
6. Support external instructions to set signal delay, motion speed, acceleration and other simulation parameters;
7. Support external commands to set preset tracks such as linear motion and circular motion;
8. Supporting external filling motion track, the module calculates and outputs the corresponding navigation satellite signal according to the input information;
9. Support real-time ephemeris mode and permanent ephemeris mode;
10. Support the setting of preset coordinates for power-on automatic transmission;
11. Support satellite navigation signal suppression jamming output;
12. Provide control interface for secondary development of network;

Main Technical Indicators

Technical indicators

• Support GPS, BDS, GLONASS, Galileo navigation satellite signal simulation, and the signal output frequency band is as follows.

Serial number	Satellite system	Frequency band
1	BDS	B1I
2	BDS	B1C
3	BDS	B2I
4	BDS	B3I
5	GPS	L1 C/A
6	GPS	L2
7	GPS	L5
8	GALILEO	E1
9	GALILEO	E5a
10	GALILEO	E6
11	GLONASS	L1
12	GLONASS	L2
13	GLONASS	L3

• Navigation satellite signal receiving frequency: GPS, BDS, GLONASS, Galileo;
• Maximum transmitting power: ≥ 0dBm;
• Power adjustment range: 80dB, minimum resolution: 1dB
• Power-on startup time: 60 s;
• Navigation satellite signal synchronization time: < 240s;

Form factor, interface definition

• Product size (without connector): 196.5mm (L) × 178.5mm (W)

• Weight: < 2.0 kg
• Power sourc:

Input voltage: DC 20V ~ 28V

Power consumption: ≤ 30 W.

• Module interface definition:

Signal receiving port: SMA, 1 channel, receiving navigation satellite signal, supporting DC + 5V feed;

Signal transmission port: SMA, 7 channels, transmitting navigation satellite signals;

Power input interface: XH2.5-2P male socket, 1-way

Network port communication interface: RJ45, 1-way, SFP, 1-way

Work environment

Working temperature: -40 ℃ ~ + 50 ℃

Storage temperature: -40 ℃ ~ + 80 ℃